1. Forum
  3. The Highway
  5. The Campfire
  7. Planing a 24" wide board

Planing a 24" wide board

12 Sep 2012 11:43 #1 by RenegadeCJ
Planing a 24" wide board was created by RenegadeCJ
I was given 2 big slabs of pine from my inlaws, probably about 24" wide x 10' tall. Want to make it into something cool, but it is cupped from being improperly stored while curing. Does anyone know where I can take it to plane it down so I can use it for a counter, table, desk or something?
Too bad future generations aren't here to see all the great things we are spending their $$ on!!

Please Log in or Create an account to join the conversation.

12 Sep 2012 11:52 #2 by Blazer Bob
Replied by Blazer Bob on topic Planing a 24" wide board
Check with ChaisSaw Bob. 303 641 6988

Please Log in or Create an account to join the conversation.

12 Sep 2012 12:09 #3 by BearMtnHIB
Replied by BearMtnHIB on topic Planing a 24" wide board
Planers more than 20" wide are rare- better start calling cabinet makers.

Please Log in or Create an account to join the conversation.

12 Sep 2012 12:34 #4 by pacamom
Replied by pacamom on topic Planing a 24" wide board
Rockdoc probably has one.

Please Log in or Create an account to join the conversation.

12 Sep 2012 14:59 #5 by Nobody that matters
Replied by Nobody that matters on topic Planing a 24" wide board
Make 'em into 12" wide boards and there will be less waste - and more planers around that could handle the job. After planing, you could always glue them back together if 24" is required. It shouldn't show much.
"Whatever you are, be a good one." ~ Abraham Lincoln

Please Log in or Create an account to join the conversation.

13 Sep 2012 09:36 #6 by RenegadeCJ
Replied by RenegadeCJ on topic Planing a 24" wide board

Nobody that matters wrote: Make 'em into 12" wide boards and there will be less waste - and more planers around that could handle the job. After planing, you could always glue them back together if 24" is required. It shouldn't show much.


That was my original thought...I have a planer for a 12" board, but was hoping to avoid cutting it and glueing it back together. You are right though, it wouldn't show too much....
Too bad future generations aren't here to see all the great things we are spending their $$ on!!

Please Log in or Create an account to join the conversation.

26 Sep 2012 19:57 #7 by pacamom
Replied by pacamom on topic Planing a 24" wide board
There's a 24 inch planer up for auction this Saturday. Kenosha Auctions -n This one will be at Bandimere.


http://www.auctionflex.com/showlots.ap? ... =1&lang=En

Please Log in or Create an account to join the conversation.

27 Sep 2012 05:56 #8 by RenegadeCJ
Replied by RenegadeCJ on topic Planing a 24" wide board
I'll have to check that out....at Bandimere?
Too bad future generations aren't here to see all the great things we are spending their $$ on!!

Please Log in or Create an account to join the conversation.

27 Sep 2012 06:08 #9 by pacamom
Replied by pacamom on topic Planing a 24" wide board
Kenosha doesnt do auctions at the old Reggies. They do them wherever. They need a lot of room for all those trucks in this auction coming up.

Here is their website

http://www.kenoshaauctioninc.com/Auction_sch.htm

Please Log in or Create an account to join the conversation.

27 Sep 2012 21:30 #10 by pacamom
Replied by pacamom on topic Planing a 24" wide board
The auction at Bandimere will be in the parking lot closest to C470 on the west side. They are starting to accumulate the vehicles. Saw them as I passed by today.

Please Log in or Create an account to join the conversation.

  1. Forum
  3. The Highway
  5. The Campfire
  7. Planing a 24" wide board
Time to create page: 0.161 seconds
Powered by Kunena Forum
sponsors
LookoutAlert Emergency Notification System
Top Of Mind Marketing TV
© My Mountain Town (new)
Google+